-Manufactured from 2mm thick galvanised steel
-Bolt hole to suit M12 fixing, nail holes 4mm diameter
-Use 30 x 3.75mm sheradised square twisted nails in all pre-punched holes, together with bolts in Multi Truss Hanger range where required
-Bearing surface on all multi-truss hangers is 75mm
-Produced from galvanised steel to BS EN 10346:2009 + G275 as standard

For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur

-Manufactured from 2mm thick galvanised steel
-Bolt hole to suit M12 fixing, nail holes 4mm diameter
-Use 30 x 3.75mm sheradised square twisted nails in all pre-punched holes, together with bolts in Multi Truss Hanger range where required
-Bearing surface on all multi-truss hangers is 75mm
-Produced from galvanised steel to BS EN 10346:2009 + G275 as standard

For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur

-Manufactured from 2mm thick galvanised steel
-Bolt hole to suit M12 fixing, nail holes 4mm diameter
-Use 30 x 3.75mm sheradised square twisted nails in all pre-punched holes, together with bolts in Multi Truss Hanger range where required
-Bearing surface on all multi-truss hangers is 75mm
-Produced from galvanised steel to BS EN 10346:2009 + G275 as standard

For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur

-Manufactured from 2mm thick galvanised steel
-Bolt hole to suit M12 fixing, nail holes 4mm diameter
-Use 30 x 3.75mm sheradised square twisted nails in all pre-punched holes, together with bolts in Multi Truss Hanger range where required
-Bearing surface on all multi-truss hangers is 75mm
-Produced from galvanised steel to BS EN 10346:2009 + G275 as standard

For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur

-Manufactured from 2mm thick galvanised steel
-Bolt hole to suit M12 fixing, nail holes 4mm diameter
-Use 30 x 3.75mm sheradised square twisted nails in all pre-punched holes, together with bolts in Multi Truss Hanger range where required
-Bearing surface on all multi-truss hangers is 75mm
-Produced from galvanised steel to BS EN 10346:2009 + G275 as standard

For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur

-Manufactured from 2mm thick galvanised steel
-Bolt hole to suit M12 fixing, nail holes 4mm diameter
-Use 30 x 3.75mm sheradised square twisted nails in all pre-punched holes, together with bolts in Multi Truss Hanger range where required
-Bearing surface on all multi-truss hangers is 75mm
-Produced from galvanised steel to BS EN 10346:2009 + G275 as standard

-Special Multi Truss Hanger with concealed fixing flanges
-Available 100mm wide and above