Home > Drills/PTA > MEXCO Diamond Blades
Sort By:
Page of 1
MEXCO Abrasive Materials Diamond Blades ABX10 MEXCO Abrasive Materials Diamond Blades ABX10

The ABX-Abrasive Material diamond blade offers the user extended product lifetime when cutting abrasive building materials like medium density concrete blocks and lignacite products due to its harder segment bond.

- Segment: 10mm
- Segment Type: Segmented
- Segment Attachment: Sintered
- Gullet: Narrow Keyhole
- Usage: Wet & Dry
- Ventilation: No

Applications: *Soft Slate, Medium Sandstone, Concrete Roof Tiles, Concrete With Med Sharp Sandstone, Coarse Sandstone, Breeze Block

**Concrete Paviours, Soft Facing Brick, Concrete Blocks Over 15kn, Hard Sandstone, Shallow Concrete Screed, Asphalt Over Concrete, Concrete Block Under 15kn, Green Concrete

*Recommended to cut these materials
**Will cut these materials with the possibility of reduced lifetime/glazing

MEXCO Ceramics Diamond Blades CMX90 MEXCO Ceramics Diamond Blades CMX90

The CMX-Tile Cutting diamond blade has been developed with a continuous rim segment to cut ceramic tiles quickly and cleanly.
The performance of this product can be attributed to its high diamond concentration allowing a large amount of diamond grit to be exposed at all times producing a fast accurate clean cut.
8mm Segment height.
High diamond concentration.


- Segment: 8mm
- Segment Type: Continuous
- Segment Attachment: Sintered
- Usage: Wet & Dry. Wet cut advised on diameters above 125mm
- Ventilation: No

Applications:
* Ceramic Tiles

** Marble Tiles


* Recommended to cut these materials
** Will cut these materials with the possibility of reduced lifetime/glazing.

MEXCO Dual Purpose Turbo Diamond Blades DTXCEL MEXCO Dual Purpose Turbo Diamond Blades DTXCEL

The DTX-Dual Purpose Turbo diamond blade is recommended for the contractor cutting a wide range of non-abrasive building products.
The DTX produces an excellent speed of cut in applications ranging from hard materials to non-abrasive building materials whilst incorporating an anti-chipping continuous rim segment.
Turbo fast cut segment.
Rapid cool centre.


- Segment: 9mm
- Segment Type: Continuous
- Segment Attachment: Sintered
- Gullet: None
- Usage: Wet & Dry
- Ventilation: Yes

Applications:
* Ductile Iron, Granite, Class A Engineering Brick, Clay Paviours, Clay Pipes Vitrified, Clay Roof Tiles, Quarry Tiles, Non Abrasive Indian Sandstone,
Hard Facing Brick, Medium Facing Brick, Hard Slate, River Gravel Aggregate Concrete, Flint Aggregate Concrete, Reinforced Concrete,

Concrete Kerbs, Concrete Slabs, Reinforced Lintels, Hard Limestone, Limestone Aggregate Concrete, Concrete Paviours

** Soft Facing Brick, Concrete Blocks Over 15kn, Hard Sandstone, Soft Slate, Medium Sandstone

* Recommended to cut these materials
** Will cut these materials with the possibility of reduced lifetime/glazing

MEXCO Fibre Cement Board Diamond Blade FBXCEL MEXCO Fibre Cement Board Diamond Blade FBXCEL

The FBX blade has Polycrystalline diamond (PCD) teeth that cut through cement based fibre boards, composite materials and many other difficult applications with outstanding performance results compared to a TCT blade or diamond continuos blade.

- Polycrystalline diamond tipped teeth
- Smoother, cleaner, more accurate cut
- Unbeatable performance in multiple layer cutting

Common applications include: Fibre Cement Board, Laminated and Melamine Surfaces, GRP, Softwoods, Hardwoods, MDF, Plywood, Chipboard

MEXCO General Purpose Diamond Blades GPX10 MEXCO General Purpose Diamond Blades GPX10

The GPX10 offers a cost effective solution for the user who requires a diamond blade that can cope with the cutting of the most widely used non-abrasive building materials.
10mm Segment height.
High diamond concentration.


- Segment: 10mm
- Segment Type: Segmented
- Segment Attachment: Sintered
- Gullet: Narrow Keyhole
- Usage: Wet & Dry
- Ventilation: No

Applications:
* Medium Facing Brick, Hard Slate, River Gravel Aggregate Concrete, Flint Aggregate Concrete, Reinforced Concrete, Concrete Kerbs,
Concrete Slabs, Reinforced Lintels, Hard Limestone, Limestone Aggregate Concrete, Concrete Paviours

** Non Abrasive Indian Sandstone, Hard Facing Brick, Soft Facing Brick, Concrete Blocks Over 15kn, Hard Standstone

* Recommended to cut these materials
** Will cut these materials with the possibility of reduced lifetime/glazing

MEXCO General Purpose Diamond Blades GPX10-8 MEXCO General Purpose Diamond Blades GPX10-8

The GPX-General Purpose diamond blade provides the user with excellent cutting characteristics in the majority of non-abrasive construction products used in the UK.
8mm Segment height.
High diamond concentration.


- Segment: 8mm
- Segment Type: Segmented
- Segment Attachment: Sintered
- Gullet: Narrow Keyhole
- Usage: Wet & Dry
- Ventilation: No

Applications:
* Medium Facing Brick, Hard Slate, River Gravel Aggregate Concrete, Flint Aggregate Concrete, Reinforced Concrete, Concrete kerbs,
Concrete Slabs, Reinforced Lintels, Hard Limestone, Limestone Aggregate Concrete, Concrete Paviours

** Non Abrasive Sandstone, Hard Facing Brick, Soft Facing Brick, Concrete Blocks Over 15kn, Hard Sandstone

* Recommended to cut these materials
** Will cut these materials with the possibility of reduced lifetime/glazing

MEXCO General Purpose Diamond Blades GPX10T MEXCO General Purpose Diamond Blades GPX10T

The GPX-General Purpose diamond blade provides the user with excellent cutting characteristics in the majority of non-abrasive contruction products used in the UK.

- Segment: 10mm
- Segment Type: Continuous
- Segment Attachment: Sintered
- Gullet: None
- Usage: Wet & Dry
- Ventilation: Yes

Applications: *Medium Facing Brick, Hard Slate, River Gravel Aggregate Concrete, Flint Aggregate Concrete, Reinforced Concrete,
Concrete Kerbs, Concrete Slabs, Reinforced Lintels, Hard Limestone, Limestone Aggregate Concrete, Concrete Paviours

**Non Abrasive Indian Sandstone, Hard Facing Brick, Soft Facing Brick, Concrete Blocks Over 15kn, Hard Sandstone

*Recommened to cut these materials
**Will cut these materials with the possibility of reduced lifetime/glazing

MEXCO General Purpose Diamond Blades GPX10-15 MEXCO General Purpose Diamond Blades GPX10-15

The GPX-General Purpose diamond blade provides the user with excellent cutting characteristics in the majority of non-abrasive contruction products used in the UK.
15mm Castellated Segments allow fast cutting speed whilst offering an extended lifetime.

- Segment: 15mm
- Segment Type: Segmented
- Segment Attachment: Sintered
- Gullet: Angled
- Usage: Wet & Dry
- Ventilation: Yes

Applications: *Medium Facing Brick, Hard Slate, River Gravel Aggregate Concrete, Flint Aggregate Concrete, Reinforced Concrete,
Concrete Kerbs, Concrete Slabs, Reinforced Lintels, Hard Limestone, Limestone Aggregate Concrete, Concrete Paviours

**Non Abrasive Indian Sandstone, Hard Facing Brick, Soft Facing Brick, Concrete Blocks Over 15kn, Hard Sandstone

*Recommened to cut these materials
**Will cut these materials with the possibility of reduced lifetime/glazing

MEXCO Tri-Purpose Diamond Blades TPXCEL MEXCO Tri-Purpose Diamond Blades TPXCEL

The TPX-Tri-purpose diamond blade ensures that you have the correct diamond blade for the most common applications already mounted on your saw.
The castellated segment design ensures quick stock clearance and a clean finish.
In addition to its other attributes it also has a revolutionary electroplated diamond grit design which extends from the blade centre protecting the core when being used in abrasive applications.
10mm segment wiht TCT undercutting protection.
Electroplated diamond grit for core protection.

- Segment: 10mm
- Segment Type: Castellated
- Segment Attachment: Laser Welded
- Gullet: Keyhole
- Usage: Wet & Dry
- Ventilation: No

Applications: *Medium Facing Brick, Hard Slate, River Gravel Aggregate Concrete, Flint Aggregate Concrete, Reinforced Concrete, Concrete Kerbs, Concrete Slabs,
Reinforced Lintels, Hard Limestone, Limestone Aggregate Concrete, Concrete Paviours, Soft Facing Brick, Concrete Blocks Over 15kn, Hard Sandstone, Soft Slate,
Medium Sandstone, Concrete Roof Tiles, Concrete With Med Sharp Sandstone, Coarse Sandstone, Asphalt Over Concrete, Shallow Concrete Screed, Breeze Block

**Ductile Iron, Granite, Class A Engineering Brick, Clay Paviours, Clay Pipes Vitrified, Clay Roof Tiles, Quarry Tiles, Non Abrasive Indian Sandstone, Hard Facing Brick,
Concrete Bloc Under 15kn, Green Concrete, Lignacite Blocks, Asphalt

*Recommended to cut these materials
**Will cut these materials with the possibility of reduced lifetime/glazing

MEXCO Tri-Purpose Diamond Blades TPX90 MEXCO Tri-Purpose Diamond Blades TPX90

The TPX-Tri-purpose diamond blade ensures that you have the correct diamond blade for the most common applications already mounted on your saw.
The narrow gullets and 12mm diamond segments ensure a clean finish and fast stock removal when cutting hard materials.
Narrow gullets for fast clean cuts.
Deep draft under cutting portection segment.


- Segment: 12mm
- Segment Type: Deep Draft
- Segment Attachment: Laser Welded
- Gullet: Narrow
- Usage: Wet & Dry
- Ventilation: No

Applications: *Medium Facing Brick, Hard Slate, River Gravel Aggregate Concrete, Flint Aggregate Concrete, Reinforced Concrete, Concrete Kerbs, Concrete Slabs,
Reinforced Lintels, Hard Limestone, Limestone Aggregate Concrete, Concrete Paviours, Soft Facing Brick, Concrete Blocks Over 15kn, Hard Sandstone, Soft Slate,
Medium Sandstone, Concrete Roof Tiles, Concrete With Med Sharp Sandstone, Coarse Sandstone, Asphalt Over Concrete, Shallow Concrete Screed, Breeze Block

**Ductile Iron, Granite, Class A Engineering Brick, Clay Paviours, Clay Pipes Vitrified, Clay Roof Tiles, Quarry Tiles, Non Abrasive Indian Sandstone, Hard Facing Brick,
Concrete Bloc Under 15kn, Green Concrete, Lignacite Blocks, Asphalt

*Recommended to cut these materials
**Will cut these materials with the possibility of reduced lifetime/glazing

MEXCO Ultra Hard Materials Diamond Blades UHXCEL MEXCO Ultra Hard Materials Diamond Blades UHXCEL

The UHX-Ultra Hard Materials diamond blade has been developed to offer fast cutting of hard natural stone products and man made fired materials such as porcelain and ceramic products.
The performance of this blade can be attributed to its ultra thin 1.2/1.4/1.6/2.0mm castellated design turbo segment enabling not only fantastic performance but also a super clean cut with a huge reduction in chipping.
Ultra thin turbo segment.
10mm Segment height.

- Segment: 10mm
- Segment Type: Continuous Castellated Turbo
- Segment Attachment: Sintered
- Usage: Can be used dry. Wet cut advised on diameters above 125mm
- Ventilation: Yes

Applications:
*Porcelain, Hard Marble, Marble Tiles, Ceramic Tiles, Ductile Iron, Granite, Class A Engineering Bricks, Clay Paviours, Clay Pipes Vitrifield,

Clay Roof Tiles, Quarry Tiles, Non Abrasive Indian Sandstone, Hard Facing Brick, Medium Facing Brick, Hard Slate.

*Recommended to cut these materials

Advisory: Maximum recommended cutting depth 20mm