Home > Drills/PTA > Wera Bit Holders
Sort By:
Page of 1
Wera 897 Bit Holder Impaktor - Ring Magnet Wera 897 Bit Holder Impaktor - Ring Magnet

Impaktor bit holder with retaining ring and magnet.

-The Impaktor stainless steel holder with a retaining ring and magnet satisfies extreme, dynamic requirements
-Consciously no small mechanical component parts fitted as they would be more susceptible to failure.
-It focuses on the basic bit holding function and the cushioning of the extreme impulse peaks with its two different torsion zones.
-Mainly used in industrial screw assembly applications e.g. with screwdriving robots.
-Two Torsion zones double the life of screwdriver bits, use Impaktor bits for TriTorsion!
-Strong retaining ring and magnet spin sleeve allows the steadying of the screw start
-For best results, use the holder with Wera Impaktor bits
-For the heaviest duty jobs in all powertools and high voltage impact drivers

-Length: 75mm
-Drive: 1/4"

Wera 897 R Bit Holder Impaktor - Magnetic Wera 897 R Bit Holder Impaktor - Magnetic

Impaktor holder with retaining ring and ring magnet.

-Impaktor holder to cushion extreme impulse peaks, special torsion effect from the double-torsion spring,
-Fitted with retaining ring and magnet for secure positioning of the bit and screw.
-The Impaktor technology ensures an above-average service life even under extreme conditions.
-It is also ideal for above-head work.
-Should the magnet function not be required in a particular situation e.g. when working with metal, it can be extracted from the screwdriving area and thereby be “disabled”.
-Mainly used in manual power tool applications.
-Two Torsion zones double the life of screwdriver bits, use Impaktor bits for TriTorsion!
-Ringmagnet sleeve slides forward to hold screws up to 10" long
-Spin sleeve allows the steadying of the screw start.
-For the heaviest duty jobs in all powertools and high voltage impact drivers.

-Length: 75mm
-Drive: 1/4"

Wera 897 R Bit Holder Rapidaptor - BiTorsion Wera 897 R Bit Holder Rapidaptor - BiTorsion

Rapidaptor BiTorsion universal bit holder

-Part of Wera's unique BiTorsion system using Torsion Technology.
-This holder will dramatically extend the life of screwdriver bits.
-The BiTorsion system means that the holder has been precision hardened to allow the metal to flex slightly in controlled areas and absorb the stresses applied by a power tool.
-Features a press in auto bit lock for single hand bit change and a spin sleeve which allows the steadying of the screw start.
-For an even longer service life use Wera BiTorsion screwdriver bits.
-Patented BiTorsion System for longer service life
-For best results, use the holder with Wera BiTorsion bits
-For all drill drivers (non impact)

-Length: 75mm
-Drive: 1/4"

Wera 3888 K SB Bit Holder Rapidator - Stainless Steel Wera 3888 K SB Bit Holder Rapidator - Stainless Steel

Rapidator univeral bit holder, stainless.

-Stainless Steel bit holder for use with stainless steel screws.
-Patented quick-release bit holder securely locks the screwdriver bit
-Easy one handed bit removal due to the unique locking system.
-Bit lock and strong permanent magnet.
-The use of stainless tools with stainless steel fasteners prevents the cross contamination of metal, preventing rust from a galvanic process.
-Vacuum ice-hardened for industrial strength.
-For use in the construction and food industries or wherever stainless steel fasteners and materials are used.
-Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology.
-Patented design & technology

-Length: 50mm

-Drive: 1/4"

Wera 887 RR Bit Holder Rapidaptor - Ring Magnet Wera 887 RR Bit Holder Rapidaptor - Ring Magnet

Rapidator universal bit holder with ring magnet.

-Magnetic ring securely holds the screw onto the bit holder to make driving screws into confined spaces or overhead much easier.
-Ideal for use in general construction.
-Suitable for dry-lining where the holder releases the screw without breaking the paper.
-It also features an auto bit lock for single hand bit change and a spin sleeve which allows the steadying of the screw start.
-For an even longer service life use Wera BiTorsion screwdriver bits.
-Bit holder has magnetic function to hold screws up to 10" long.
-Spin sleeve allows the steadying of the screw start
-For best results, use the holder with Wera BiTorsion bits For all drill drivers (non impact)

-Length: 57mm
-Drive 1/4"

Wera 889 K Bit Holder Rapidaptor - Universal Wera 889 K Bit Holder Rapidaptor - Universal

Rapidator universal bit holder.

-Patented quick-release bit holder securely locks the screwdriver bit in place making sure its not lost during use.
-Easy one handed bit removal due to the unique locking system.
-Bit lock and strong permanent magnet.
-Spin sleeves on the holder allows safe and comfortable.
-Rapidaptor quick release technology.
-Spin sleeve for comfortable & safe use.
-Patented design & technology Unrivalled performance.

-Length: 50mm
-Drive: 1/4"

Wera 899 SB Bit Holder Magnetic - Universal Wera 899 SB Bit Holder Magnetic - Universal

Universal bit holder for use with 1/4" hexagonal screwdriver bits.

-Stainless steel sleeve, retaining ring and strong permanent magnet.
-Length: 50mm
-Drive: 1/4"

Wera 899 SB Bit Holder Magnetic - Universal - Extra Long Wera 899 SB Bit Holder Magnetic - Universal - Extra Long

Universal bit holder for use with 1/4" hexagonal screwdriver bits.

-Stainless Steel sleeve, retaining ring and strong permanent magnet.
-Length: 152mm
-Drive: 1/4"